Lowered rear axle plates are threaded 3/8″-18 for fender brace sissy bar mounting. Adjusters threaded 3/8″-24 use screws for adjusters, to act as push type. Features a raw cast steel construction.
Axle mounts accept 3/4″ axle, mounts will need material added to fit tight into rectangular swing arm tubing. Recommended plug weld from sides as well. Use axle and spacers or 3/4″ threaded rod for alignment purposes. Fabricator must cut swing arm and reweld lowering axle plates in place and check fender clearance. *NOTE: Must be welded in place. Use rigid frame wheel adjusters. *NOTE: Welding and fabrication required for installation. Cut original rectangular swing arm to desired length.
Axle mounts accept 3/4″ axle, mounts will need material added to fit tight into rectangular swing arm tubing. Recommended plug weld from sides as well. Use axle and spacers or 3/4″ threaded rod for alignment purposes. Fabricator must cut swing arm and reweld lowering axle plates in place and check fender clearance. *NOTE: Must be welded in place. Use rigid frame wheel adjusters. *NOTE: Welding and fabrication required for installation. Cut original rectangular swing arm to desired length.
| FITS | FL 1973-1984 XL 1979-UP FX 1973-1984 |
|---|
